PRODUCTS

EQUIPMENTS

Tecpesa manufactures a wide range of Hottaping equipment, Linestopping, and Slim Valves, as well as the power units to operate such equipment.

TBL-182/242/302TH

The TBL-182TH / TBL-242TH / TBL-302TH Tapping Equipments are designed to perform small diameter Taps without shutdown or reduction of flow. The Tapping range of these Machines is from 1/2” to 4”; they can also be used for Linestopping and to install threaded plugs. These Machines are available in three Boring Bar extensions: 18” for the TBL-182TH, 24” for the TBL-242TH, and 30” for the TBL302TH. All Machines are supplied complete with operation and maintenance manual, ratchet crank handle for manual operation and an optional air gun drive.


TBL-0322

The TBL-322 Tapping Equipment is designed to perform small diameter Taps without shutdown or reduction of flow. The Tapping range of this Machine is from 1” to 8” with a boring bar travel of 32”. The TBL-322 is supplied with an Air Driven Motor, but can also be supplied with an optional Hydraulic Power Pack. Also is supplied complete with operation and maintenance manual.


TBL-0444

The TBL-444 Tapping Equipment is designed to perform small diameter Taps without shutdown or reduction of flow. The Tapping range of this Machine is from 4” to 12” with a boring bar travel of 44”. The TBL-444 is supplied with an Air Driven Motor, but can also be supplied with an optional Hydraulic Power Pack. Also is supplied complete with operation and maintenance manual.


TBL-0664

The TBL-664 Tapping Equipment is designed to perform Taps without shutdown or reduction of flow. The Tapping range of this Machine is from 4” to 16” with a boring bar travel of 66”. The TBL-664 is hydraulic powered. Also is supplied complete with operation and maintenance manual


TBL-1106

The TBL-1104 Tapping Equipment is designed to perform big diameter Taps without shutdown or reduction of flow. The Tapping range of this Machine is from 12” to 42” with a boring bar travel of 110”. The TBL-1106 is hydraulic powered. Also is supplied complete with operation and maintenance manual.

Manual Cylinder

The TBL-MPT and MO612 Manual Cylinders are used to provide efficient and economical means of stopping off mains for repairs, relocations or additions. The TBL-MPT has the capability of plugging a line from 2” to 4” with a bar reach of 28” and the TBLMO612 can plug 4” through 12” with a bar reach of 48”. Both models can operate at a maximum working pressure of 34 bar .


Hydraulic Cylinder

The TBL-ACT Hydraulic Cylinders are used to temporary isolate a section of a pipeline for maintenance (repairs or additions) without shutdown of the line. The Hydraulic Cylinders are used with the corresponding housings and plugging heads according to the diameter of the line. Covering a range from 4” to 48” with different control bar reach. The Hydraulic Cylinders have a control bar with a direct reading scale and sight hole enabling indication and control of the progression of the plugging head. Operation is made easy by way of the position of the control valve situated at the lower end of each Hydraulic Cylinder.

Class150

The SLIM VALVE CLASS 150 for low pressure is a full opening, temporary valve. It is designed to be used with Hot-Tap & Linestop equipment and fittings. Its compact design reduces the length needed for the drilling machine’s boring bar to make taps. It requires only little space and is easy to handle. It is available in sizes starting from 2” in Class 150 – larger sizes are available upon customer request -. For SLIM VALVES CLASS 150, the maximum working pressure is 19 bar (275 PSI). All Slim Valves have been proved with a Hydrostatic Testing. There are other tests available according to the client’s specifications.


Class 300/600

The SLIM VALVES CLASS 300 & 600 are designed to be used with Hot-Tap & Linestop equipment and fittings. Specifically designed for Hot-Tap and Linestop Operations, its compact face-to-face dimension reduces the length needed for the drilling machine’s boring bar to make taps and therefore the installation time. Handling becomes easier and enables to use it where only small space is available. It is bidirectional and can be installed on the fitting in any direction (parallel or perpendicular to the pipeline). It is available in sizes 2” to 36” but larger sizes are available upon customer request. The SLIM VALVES CLASS 300 & 600 sized 24” and more are opened and closed with hydraulic equipment. Furthermore they are equipped with an internal equalization pressure system. Each Slim Valve is tested at 1.5 the maximum working pressure to guarantee its performance. All Slim Valves have been proved with a Hydrostatic Testing. There are other tests available according to the client’s specifications.

MARKETS